Plenum cables are Ethernet networking cables designed for use in plenum spaces. This space is usually found between floors in a building. It is important to first understand what a “plenum” space is before you learn more about this cable. It requires a particular type of cable to be installed there.
A plenum space houses the air circulation necessary for heating, cooling, ventilation and cooling systems. This space is highly susceptible to fire hazards due to its constant air circulation. Cat6 Plenum-rated cables can be used to stop fires from spreading throughout the space.
Cable is a type of cable that is fire-resistant and jacketed. This cable is tested for fire resistance. The jacket is typically made from Teflon to resist fire and toxic fumes. This cable should be used in a plenum space.
Currently Plenum Cable Types:
There are many types of these cables. This is because plenum-rated ethernet cable refers to a cable with a fire-retardant jacket and is suitable for installation in plenum space. These cables can be produced in three types: category 5 enhanced (Cat5e), Cat6 (Cat6) and category 6 augmented (Cat6a), depending on the market. These cables are usually sold in lengths of 1000 feet.
The Cat6a cable is the most expensive, followed by a Cat6 Solid Copper 1000ft and finally a Cat5e. Because of the prominent and high-spec Cat6a cables. It is followed by the Cat6 and Cat5e cables. If you have a limited budget and need an Ethernet cable that has good specs, Cat5e Plenum might be a good option.
These cables are made from pure copper conductors, ranging in strength from 23AWG up to 26AWG, or copper-clad aluminium conductors. This plenum Ethernet cable has a twisted-pair design. It is very popular and useful in reducing crosstalk and other electrical noise.
What is Cat6 Plenum Cable and How Does it Work?
A Cat6 plenum cable can be used for communications, but is also a plenum because it has been tested and is Category 6 CMP-rated. A cable that has a jacket that meets strict fire regulations. Two types of cables can be used to resist flame progression inflame sensitive applications.
This cable has a flame retardant design that limits flame progression to a maximum of five feet. The cat6 cable doesn’t emit smoke or fumes when it burns ,unlike regular plastic. This cable features the plenum jacket and the specifications of a cat6 cabling.
1000 ft Cat6 Plenum
The cable was made to be used in the building’s plenum area. Plenum areas allow air circulation for heating and air conditioning systems. They allow transfer airflows and conditioned/heated water to pass through at pressures higher than the atmospheric limit.
The plenum spaces in Cat6 plenum cables can be set ablaze by fire. Therefore, they are made from high-quality Polyvinyl Chloride. They are protected by flame-resistant PVC jackets and FEP insulation. This allows them to deliver excellent performance in extreme temperatures. PVC in Cat6 Plenum 1000ft emits less smoke and slows down the spread of fire.